SIEMENS TXS1.12F10 Programmable controller

Siemens TXS1.12F10 Overview

The Siemens TXS1.12F10 is a digital output module belonging to the Siemens SICAM TXS series. SICAM TXS is a modular system for substation automation and control. This digital output module is designed to provide reliable control signal outputs for driving external devices such as circuit breakers, disconnectors, and indicator lamps.

Product Detailed Description

• Function:

• Provides 16 digital output channels.

• Used to send control commands or status signals to external devices.

• Each output channel typically has galvanic isolation to improve the system's immunity to interference.

• Can be configured as normally open (NO) or normally closed (NC) contacts.

• Output contacts usually have a certain current and voltage carrying capacity.

• Integrated status indicator LEDs to display the status of each output channel.

• Can be configured and controlled via the bus interface of the SICAM TXS system.

• Features:

• High reliability, suitable for the demanding environment of substation automation.

• Modular design for easy expansion and maintenance.

• Galvanic isolation to enhance system safety.

• LED status indication for easy diagnostics.

• Integrated into the SICAM TXS system with unified configuration and management.

Product Parameters

As the TXS1.12F10 is a specific module within the SICAM TXS system, detailed parameters should be referenced in the official product manual for the Siemens SICAM TXS system. Some potential relevant parameters include:

• Number of Output Channels:

• 16

• Output Type:

• Relay output

• Contact Configuration:

• Configurable as NO or NC

• Rated Voltage (Un):

• E.g., 24 V DC, 48 V DC, 60 V DC

• Rated Current (In):

• E.g., 2 A, 5 A

• Contact Material:

• Typically high-reliability alloy

• Galvanic Isolation Voltage:

• E.g., 2 kV AC

• Power Consumption:

• Varies depending on module configuration and output status

• Connection Method:

• Typically pluggable screw terminals

• Ambient Temperature:

• Operating temperature range typically -25 °C to +70 °C

• Protection Degree:

• Typically IP20

• Dimensions (W x H x D):

• Complies with the standard dimensions of the SICAM TXS system

• Weight:

• Varies depending on module configuration

• Standards Compliance:

• Complies with substation automation-related standards such as IEC 61850, IEC 60255

Product Advantages

• High Reliability:

• Specifically designed for substation automation applications with high reliability and long service life.

• Modular Design:

• Easy to integrate into the SICAM TXS system, facilitating expansion and replacement.

• Galvanic Isolation:

• Provides galvanic isolation between channels, enhancing the system's immunity to interference and safety.

• Status Indication:

• Each output channel has an LED indicator, allowing users to easily monitor the output status and perform fault diagnostics.

• System Integration:

• As part of the SICAM TXS system, it seamlessly integrates with other SICAM TXS modules for unified configuration and management.

Precautions

• Correct Installation:

• Install according to the installation guidelines of the Siemens SICAM TXS system, ensuring the module is correctly mounted on the rack and connected to the system bus.

• Power Requirements:

• Ensure that the SICAM TXS system is supplied with the required power.

• Environmental Conditions:

• Ensure that the operating environment temperature and humidity are within the module's permissible range.

• Wiring Specifications:

• Connect the control cables of external devices correctly according to the wiring diagram, ensuring reliable and safe wiring.

• Parameter Configuration:

• Use the configuration tools of the SICAM TXS system to correctly configure the module's parameters, such as output type and contact properties.

• Safe Operation:

• Always observe relevant electrical safety regulations when operating and maintaining the SICAM TXS system.

Product Applications

As part of the SICAM TXS system, the TXS1.12F10 digital output module is primarily used in substation automation for controlling and driving various external devices, including but not limited to:

• Circuit Breakers and Disconnectors:

• Sending closing and opening control commands.

• Indicator Lamps and Alarm Devices:

• Outputting status signals to indicate device operating status or fault information.

• Solenoid Valves and Relays:

• Controlling the action of auxiliary equipment.

• **Other external devices requiring digital control signals.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapor

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Related products:

E-mail: alex@fenoux.com

Tel.: +86 13338369201

Skype: +86  13338369201

WhatsApp: +86  13338369201